CNC machining center has a wide range of applications. It is also a kind of equipment often used in the field of precision machining. When using the machining center, the corresponding maintenance matters can not be ignored, whether before use, in the process or after use. Dingjun machinery has been engaged in CNC external processing for 17 years, Today I'd like to share some knowledge about the maintenance of CNC machining center.

1. Before the operation of the machining center, wear all labor protection articles, carry out lubrication and maintenance as required, and check the oil level of each lubricating oil.

2. When clamping the workpiece, it shall be handled with care to prevent bumping and damaging the worktable; When the workpiece of the machining center is heavy, the bearing capacity of the machine tool workbench shall also be verified, and the machining center shall not be overloaded.

3. The machining program can be run only after it is checked to be correct. When using the high-speed function of the machining center, it is necessary to confirm the tool matching.

4. After the machine tool of the machining center is started, check whether the movement of the spindle and worktable in all directions is normal, whether there is abnormal noise, etc.

5. During processing, always pay attention to whether the movement and processing state of the machine tool are normal and abnormal phenomena are encountered. In case of noise and alarm, stop the machine immediately for inspection and treatment, and continue processing after troubleshooting the machining center.

Good maintenance habits and periodic inspection can not only increase the service life of the machine tool, but also maintain good machining accuracy. Therefore, we will maintain and maintain the machine tool according to the cycle, and we will be calm when processing high-precision parts.